From LynnMall and the New Lynn transport centre to the residential streets around Avondale Heights, Kelston, and Glen Eden, Comsys installs CCTV, alarms, access control, and intercoms for New Lynn properties — we’re your local Glendene installer, ten minutes away.
New Lynn is anchored by LynnMall, the New Lynn transport centre (rail and bus interchange), and a working town-centre core that runs along Great North Road, Clark Street, and Totara Avenue. Surrounding residential streets include older brick-and-tile housing through Avondale Heights, Kelston, and the Glen Eden side, plus newer townhouse and apartment infill closer to the transport centre as part of the New Lynn intensification. The suburb has a mix of small light-industrial off Margan Avenue and Rankin Avenue, and a steady run of small office and professional-services tenancies through the town-centre core. Risk profile is mixed: centre retail after-hours risk, residential opportunistic break-and-enter, and tool theft in the Rankin Avenue precinct.
Comsys is based in Glendene — about 10 minutes from New Lynn via SH16 or Great North Road outside peak. Local-installer benefit is real for New Lynn sites: short site-visit lead time, single-day install on most residential jobs, and quick response if a system issue needs hands-on attention. We hold stock for the brand mix New Lynn jobs typically need (Hikvision, Dahua, Paxton, Paradox, Aiphone) plus the larger commercial brands (Inner Range, HID, 2N) for body-corporate apartment work.
A typical New Lynn residential install is a 4–6 camera IP CCTV system. For 1960s–80s brick-and-tile homes off Avondale Heights, Kelston Deviation Road, or Sandringham Road, four cameras (front, back, one side, internal entry) is the practical fit. ColorVu / Full-Color on the street side gives night identification. Wireless alarm panels (Ajax, Paradox MG) suit older homes; wired panels suit larger family homes with multiple zones.
For the New Lynn intensification townhouses and apartments around the transport centre, the install pattern is different: a turret on the apartment’s entry door (privacy-masked over corridor), integration with the building’s base-build IP intercom, and a small alarm panel sized for the apartment footprint. Body-corporate-owned cameras stay separate; we’ll confirm the boundary before quoting.
For LynnMall and the surrounding centre retail, the standard scope is identification at the entry, till camera with timestamp overlay, back-of-house and stockroom coverage, and an alarm with glassbreak on the shopfront. We work with LynnMall centre management on contractor sign-on and produce as-built drawings on handover. Town-centre office tenancies along Clark Street and Totara Avenue use Paxton Net2 on the main door, alarm with PIRs, and 4–6 IP cameras.
For Rankin Avenue and Margan Avenue light-industrial sites, the typical scope is perimeter ColorVu on the yard, ANPR at the gate, dock-level cameras for after-hours deliveries, an alarm panel with dual-tech sensors in the workshop and PIRs in the office, and Paxton Net2 on the roller door. Body-corporate apartments around the transport centre use IP intercoms (2N or Aiphone), Paxton or HID access on common doors, and CCTV on lobbies, lift lobbies, and basement carparks.
Free on-site assessment. We walk the property, note risks, and discuss what the system needs to do.
Itemised quote with brand, model, camera count, cabling notes, and labour. No "from $X" placeholders.
Most residential jobs are a single day. Cabling is run discreetly through ceiling cavities and exterior conduit.
Walkthrough, app set-up on your phone, written commissioning record, and ongoing support on 09 243 0840.
Yes. We work with LynnMall centre management on contractor sign-on and after-hours fit-out work. Tenancy scope is identification at the entry, till camera with timestamp overlay, back-of-house and stockroom coverage, and a small alarm with glassbreak on the shopfront. As-built drawings are produced on handover for the centre’s facilities team.
Some are, most aren’t fully. Most spec-build intensification townhouses have data cabling but not security cabling. We can run new Cat6 to camera and reader locations and mount equipment without disturbing the new lining where possible (via roof cavity and existing data-cable pathways). For pre-purchase, we’re happy to look at plans and identify where cabling should be run before lining is closed up.
We’re based in Glendene — 10 minutes from New Lynn. Most residential site visits within 2–3 working days, single-day installs the following week. Industrial sites along Rankin Avenue can usually be on-site within 30 minutes if a system issue needs hands-on attention.
Yes. Standard body-corporate scope is an IP video intercom (2N or Aiphone GT-DMB-N) at the lobby door, Paxton or Salto access on common doors and basement carparks, CCTV on lobby, lift lobby, and bin room, with a single management interface for the body corporate. Resident credentials can be added and revoked by the building manager. We supply a written handover pack documenting all credentials, zone numbers, and account details.
Comsys also installs across the wider Auckland region. Henderson · Te Atatū · Mount Albert · Onehunga · or browse all areas we service.
Helpful reading: CCTV cost guide for Auckland · commercial security · security audit checklist.
Indicative supplied-and-installed price for a Comsys CCTV system. Move the inputs to match your site — the calculator updates live.
This calculator is a guide only. Final pricing depends on the site visit — specific camera models, mounting access, cable routing, and any access control or alarm integration can move the number up or down. We always quote in writing after a free on-site assessment, with brand and model itemised so you can see exactly what you’re paying for.
